1.21
SEAT BELTS (3/3)
– The belt should never be
twisted.
– Following an accident,
have the seat belts checked
and replaced. If necessary,
always replace your seat belts as
soon as they show any signs of
wear.
– Make sure that the buckle is in-
serted into the appropriate latch.
Adjusting the second row side seat
belts
Slowly unwind belt 6 and click latch 7
into red buckle 8. In all cases, check
that the seat belts are operating cor-
rectly.
6
7
8
Adjusting the second row centre
seat belts (depending on vehicle)
Fasten sliding latch 9 into the red
buckle 10.
9
10
To Next Page
Loading...
