1.64
FUEL TANK (2/2)
Filling up with fuel
With the ignition off, insert the nozzle
fully before turning it on to fill the fuel
tank (risk of splashing).
Keep the nozzle in this position
throughout the entire filling operation.
When the pump cuts out automatically
at the end of the filling procedure, a
maximum of two further filling attempts
may be made, as there must be suffi-
cient space in the fuel tank to allow for
expansion.
– Never place the cap near
a source of heat or flame.
– Do not add any additives
to the fuel, you risk damag-
ing the engine.
If you notice a persistent
fuel odour you should:
– stop the vehicle as soon
as traffic conditions allow
and switch off the ignition;
– switch on the hazard warning
lights and ask your passengers to
leave the vehicle and stay clear
of the traffic.
– contact an approved Dealer.
Fuel grade
Use a high-grade fuel that complies
with the legislation in force in each
country and which must comply with
the specifications given on the label on
cover A. Please refer to the information
on “Engine specifications” in Section 6.
Petrol version
It is essential to use unleaded petrol.
The octane rating (RON) must comply
with the information provided under
Section 6 on “Engine specifications
To Next Page
Loading...
