NU739_4_G1-FRA.qxd 19/01/06 11:57 Page 1.20
NU739-4 - B73
C:\Documentum\Checkout\NU739_4_T1-ENG.win 20/3/2006 13:30
-page28
1.20
FRONT SEATS WITH MANUAL ADJUSTMENT
To move a seat forwards or
backwards
Lift lever 1 to unlock the seat. When
the seat is in the required position,
release the lever and ensure that the
seat is locked in place.
To tilt the seatback
Lift lever 5 and tilt the seatback to
the desired position.
To adjust the angle of the driver’s
seat:
Adjust dial 2.
To adjust the driver's seat height:
Move lever 3 as many times as
necessary:
- upwards to raise the seat,
- downwards to lower the seat.
To adjust the height of the seatback:
Move switch 4 in the required
direction.
Heated seats
With the ignition on, move switch 6.
A warning light on the instrument
panel comes on.
Heated seats
With the ignition on, move switch 6.
A warning light on the instrument
panel comes on.
The system, which is equipped with
a thermostat, determines whether
heating is necessary.
For safety reasons, make
these adjustments only
when the vehicle is
stationary.
Make sure the seatback is
locked in place correctly.
No objects should be
placedonthefloor(areainfront
of driver) as these objects could
slide under the pedal during
braking manoeuvres, thus
obstructing its use.
To Next Page
Loading...
