NU739_4_G1-FRA.qxd 19/01/06 11:57 Page 1.23
NU739-4 - B73
C:\Documentum\Checkout\NU739_4_T1-ENG.win 20/3/2006 13:30
-page31
1.23
STORING THE DRIVER'S SEAT POSITION
It is possible to store a driving
position using the RENAULT Card.
A driving position includes the
driver's seat position and door
mirror adjustments.
When a driving position is stored,
the seat and door mirror
adjustments linked to the
RENAULT Card used are
automatically recalled when the
doors are unlocked and opened
using the RENAULT Card.
The system operates:
- with the RENAULT Card in the
Accessories position (first notch);
- when the driver's door is opened,
with the ignition off, for about
40 minutes.
Driver’s seat memory procedure
With the RENAULT Card fully
inserted in the Card reader, adjust
the seat using switches 1, 3 and 4
(refer to the information on
Electrically controlled front seats in
Section 1).
Press button 2 until you hear a beep:
the driving position is stored.
Repeat this procedure for each of
the RENAULT Cards.
Recalling a stored position
With the vehicle stationary, briefly
press button 2.
Note: recall of the stored position is
interrupted if one of the seat
adjustment buttons is pressed
during recall.
When driving,itispossibleto
adjust the driving position, but it is
not possible to recall a driving
position.
To Next Page
