CHAPTER 3 SOFTWARE CONFIGURATION
Application Note U17209EJ1V0AN
57
3.4.10 Common area initialization
Figure 3-21. Common Area Initialization
ainit
• Error flag off
• Initial flag off
• Clear display counter
• Stop flag on
• Target speed = 0
• Speed integral value = 0
EXIT
: Refer to 4.1.12, 4.2.12, 4.3.12, 4.4.12, 4.5.12 Common area
initialization processing function.
3.4.11 Revolution start initialization
Figure 3-22. Revolution Start Initialization
start_init
Clear average speed buffer
Initialize average speed calculation area
EXIT
Output initial revolution pattern
Initialize processing area
: Refer to 4.1.13, 4.2.13, 4.3.13, 4.4.13, 4.5.13
Revolution start initialization processing function.
To Next Page
Loading...
General