ECdeclarationofincorporationforthePH20
Description
Requirements
Seealso
Page content Downloads
ECDECLARATIONOFINCORPORATION
Renishaw plc declares that the product: PH20
Complies with these standards: -
Reports demonstrating compliance have been compiled and are available on request, in paper format, to
market surveillance authorities.
Person authorised to compile the Renishaw technical file and issue the declaration of incorporation is:
Mark Acres,
Compliance Manager,
Renishaw plc, New Mills, Wotton under Edge,
Gloucestershire, Gl12 8JR, United Kingdom.
This product must not be put into service until the machinery into which it is to be incorporated has been
declared in conformity with the provisions of the Machinery Directive - 2006/42/EC.
Description: Motorised head
Part no.: A-3007-3010
A-3007-3020
Serial no.: As shown by the declaration sent with the product
BS EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use — EMC
requirements–
Part 1: General requirements
Immunity to Table 2 - industrial locations.
Emissions to Class A - industrial locations.
BS EN ISO 12100-1:2003 +
A1:2009
BS EN ISO 12100-2:2003 +
A1:2009
Safety of machinery - Basic concepts, general principles for design: -
Part 1. Basic terminology, methodology.
Part 2. Technical principles
Pa
e 2 of 73PH20 user's
uide
19/12/2012file://C:\TEMP\~hh906A.htm
To Next Page
Loading...
Need help?
General
