Renishaw PH20 - Care of equipment for the PH20 system; Warranty

CareofequipmentforthePH20system
Careofequipment
Renishaw probes and associated systems are precision tools used for obtaining precise measurements and
must therefore be treated with care.
ChangestoRenishawproducts
Renishaw reserves the right to improve, change or modify its hardware or software without incurring any
obligations to make changes to Renishaw equipment previously sold.
Warranty
Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions of
Sale) provided that it is installed exactly as defined in associated Renishaw documentation.
Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling) is to
be used or substituted. Failure to comply with this will invalidate the Renishaw warranty.
Claims under warranty must be made from authorised service centres only, which may be advised by the
supplier or distributor.
Trademarks
Windows XP and Windows 2000 are registered trade names of the Microsoft Corporation.
All trademarks and trade names are acknowledged.
Pa
g
e 4 of 73PH20 user's
g
uide
19/12/2012file://C:\TEMP\~hh906A.htm