Renishaw PH20 - MCR20 NI and MCR20

MCR20NIandMCR20
MCR20NI and MCR20 can both be used with PH20 to allow automatic module changing. If you already own an
MCR20 a new PH20 specific end cap needs to be fitted to one end of the rack.
The MCR20NI is available with these end caps fitted as standard.
For optimum metrology it is recommended that automatic module changing is carried out using MCR20NI
or MCR20.
Pa
g
e 61 of 73PH20 user's
g
uide
19/12/2012file://C:\TEMP\~hh906A.htm