Renishaw RMI-Q - Parts List

6.1
Type Part number Description
RMI-Q kit A-5687-0049 RMI-Q with 8 m (26.2 ft) cable, tool kit, quick-start guide and radio
approval label.
RMI-Q kit A-5687-0050 RMI-Q with 15 m (49.2 ft) cable, tool kit, quick-start guide and radio
approval label.
Mounting bracket A-2033-0830 Mounting bracket.
Conduit kit A-4113-0306 Conduit kit with 1 m (3.28 ft) of polyurethane conduit and bulkhead
connector (M16 thread).
Cover assembly A-5687-0305 Cover/antenna assembly: including cover screws, torx key and O-ring.
Cable assembly A-5687-0306 Cable assembly 8 m (26.2 ft) long.
Cable assembly A-5687-0302 Cable assembly 15 m (49.2 ft) long.
Cable assembly A-5687-0303 Cable assembly 30 m (98.4 ft) long.
Cable assembly A-5687-0304 Cable assembly 50 m (164 ft) long.
Tool kit A-4113-0300 Comprising: 1 x T10 tamperproof key, 1 x 4 mm hex key,14 x ferrules,
4 x M5 screw, 2 x M5 nut, 4 x M5 washer, 1 x O-ring (Ø34.5 x 3 mm).
RMI-Q support
software
A-5687-???? CD comprising: ReniKey machine macro cycles with programming
manual and macro software for multiple RTS.
Publications. These can be downloaded from our web site at www.renishaw.com
RMI-Q A-5687-8500 Quick-start guide: for rapid set-up of the RMI-Q radio machine
interface, includes CD with installation guides.
RMP60 A-4113-8501 Quick-start guide: for rapid set-up of the RMP60 probe, includes CD
with installation guides.
RMP600 A-5312-8500 Quick-start guide: for rapid set-up of the RMP600 probe, includes CD
with installation guides.
RMP40 A-5480-8500 Quick-start guide: for rapid set-up of the RMP40 probe, includes CD
with installation guides.
RLP40 A-5627-8500 Quick-start guide: for rapid set-up of the RLP40 probe, includes CD
with installation guides.
RTS A-5646-8500 Quick-start guide: for rapid set-up of the RTS probe, includes CD with
installation guides.
Styli H-1000-3200 Technical specification: Styli and accessories.
Software features H-2000-2289 Data sheet: Probe software for machine tools – illustrated features.
Software list H-2000-2298 Data sheet: Probe software for machine tools – list of programs.
Parts list
NOTE: The serial number of each RMI-Q is found on the top of the housing.