Renkforce RF-AP-N300Mini - III-3-4-3. Wps

43
III-3-4-3. WPS
Wi-Fi Protected Setup is a simple way to establish connections between WPS compatible
devices. WPS can be activated on compatible devices by pushing a WPS button on the
device or from within the device’s firmware/configuration interface. When WPS is
activated in the correct manner and at the correct time for two compatible devices, they
will automatically connect. PIN code WPS includes the use of a PIN code between the two
devices for verification.
Enable WPS
Check/uncheck this box to enable/disable WPS.
WPS Status
Displays “Configured” or “unConfigured” depending
on whether WPS and SSID/security settings for the
device have been configured or not, either manually
or using the WPS button.
Self PIN Code
Displays the WPS PIN code of the device.
SSID
Displays the SSID of the device.
Authentication Mode
Displays the wireless security authentication mode of
the device.
Authentication Key
Displays the wireless security authentication key.
Configuration Mode
The configuration mode of the device’s WPS setting is
displayed here. “Registrar” means the device acts as
an access point for a wireless client to connect to and
the wireless client(s) will follow the device’s wireless