Renkforce RF-AP-N300Mini - III-3-5-2; 5 Ghz Wireless

50
III-3-5-2. 5GHz Wireless
These settings are for experienced users only. Please do not change any of the values on
this page unless you are already familiar with these functions.
Fragment Threshold
Set the Fragment threshold of the wireless radio.
The default value is 2346.
RTS Threshold
Set the RTS threshold of the wireless radio. The
default value is 2347.
Beacon Interval
Set the beacon interval of the wireless radio. The
default value is 100.
DTIM Period
Set the DTIM period of wireless radio. The default
value is 3.
Data Rate
Set the wireless data transfer rate. The default is set
to Auto.
N Data Rate
Set the data rate of 802.11n. The default is set to
Auto.
Channel Width
Select wireless channel width (bandwidth used by
wireless signals from the device) – the
recommended value is 20/40/80MHz.