ResMed AIRMINI User Manual

English 3
Your AirMini system
Your AirMini system is comprised of the AirMini machine and one mask
pack or one setup pack.
A AirMini machine 6 20W power supply unit
B F20 connector for AirMini and AirMini
tube
7 F20 connector for AirMini
C N20 connector for AirMini and
AirMini tube
8 Vent
D
AirFit P10 for AirMini and AirMini
tube
9 Vent module
1 Start/Stop button 10
Anti Asphyxia Valve (AAV)
2 Power inlet 11 N20 connector for AirMini
3 Air outlet 12 AirFit P10 for AirMini
4 Air filter cover 13 Heat moisture exchanger - HumidAirX
(blue) and HumidAirX Plus (gray)
5
Bluetooth
®
button
14 AirMini tube
Your machine is compatible with ResMed's F20 and N20 series masks
and with the AirFit P10 for AirMini. Make sure all parts and accessories
used with the machine are compatible. For compatibility information,
refer to www.resmed.com for more information.

ResMed AIRMINI Specifications

General

Type	Travel CPAP machine
Pressure Range	4-20 cm H2O
Noise Level	30 dBA
Bluetooth	Yes
Operating Mode	CPAP, AutoSet
Sound Level	30 dBA
Altitude Adjustment	Automatic
Operating Temperature	41°F to 95°F (5°C to 35°C)
Weight	0.66 lbs
Power Supply	AC 100-240V, 50-60Hz
Humidification	Optional, with HumidX/HumidX Plus waterless humidification
Data Storage	Via AirMini app
Power Consumption	6.3W
Ramp Time	0 to 45 min (5-minute increments)
Compatible Masks	AirFit P10, AirFit N20, AirFit F20
Operating Humidity	10 to 95% relative humidity, non-condensing