English 5
Set up your machine
1. Plug the power supply unit
into the machine and the
power outlet. The connector
has an angled edge so that
the power cord can only be
inserted into the machine
one way.
2. Connect the gray end of the
AirMini tubing firmly to the
air outlet.
Add optional humidification
(for N20 or AirFit P10 for
AirMini only)
To insert the HumidAirX or
HumidAirX Plus:
1. Open the connector by
gently twisting it.
2. Hold the
HumidAirX/HumidAirX Plus
at the sides, with the
colored side pointing down
and insert it.
3. Gently push together the
connector and twist until it
locks in place.
To Next Page
Loading...
