To Next Page

To Previous Page

eltaSeltaS

eltaS

olol

®®

Page 13/16

The controller (1) compares the temperature measured by

sensor S1 at the buffer store (2) with the reverse tem-

perature at measuring sensor S2. If the measured tem-

perature difference is higher or identical to the adjusted

6.3 Reverse raising of the heating circuit:

value ΔT, the reverse temperature is increased by the

warmth of the buffer store when connecting the 3-way-

valve (3)(heating support) .

The controller (1) compares the temperatures measured

by sensor S1 in the boiler or chimney boiler (2) with the

temperature measured by sensor S2 in the store (3). If the

measured temperature difference is higher or identical to

the adjusted value DO (switch-on temperature difference),

the pump (4) is activated, if the adjusted minimum

temperature (CN, adjustment range 10,1 ...90 °C) is

simultaneously reached or exceeded. If the switch-off

6.4 Loading of the store by solid fuel boiler or chimney boiler:

temperature difference DF or the minimum temperature is

underrun, the pump switches-off.

Necessary adjustment for minimum temperature limitation

(to avoid flue gas condensation):

CN = 60 °C (recommended)

Resol DeltaSol B User Manual

Questions and Answers: