en
34
Installation Commissioning Settings AccessoriesTroubleshooting
Display
DL3 Datalogger
Be it solar thermal, heating or DHW heat exchange controllers – with the DL3
you can easily and conveniently log system data of up to 6 RESOL controllers. Get
a comprehensive overview of all controllers connected with the large full graphic
display. Transfer data with an SD memory card, or use the LAN interface to view
and process data on your PC.
SD3 / SDFK Smart Display
The RESOL SD3 and SDFK Smart Displays are used for visualising data issued
by the controller. The SD3 Smart Display indicates the collector temperature, the
store temperature and the energy yield of the solar thermal system. In the heating
area, the SDFK Smart Display indicates the solid fuel boiler temperature and the
bottom/top store temperatures as well as the pump status. Both Smart Displays
are designed for simple connection to RESOL controllers with VBus
®
. An additional
power supply is not required.
VBus
®
Touch FK
With VBus
®
Touch FK, you can turn your mobile devices into a RESOL remote data
display for your solid fuel or biomass boiler controller.
VBus
®
Touch FK is suitable for all RESOL controllers with a solid fuel boiler function
that are connected to the Internet via a RESOL Datalogger or Communication
Module.
To Next Page
Loading...
Need help?
General
