EasyManua.ls Logo

ReSound Multi Mic - User Manual

ReSound Multi Mic
27 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User guide
WIRELESS CONNECTIVITY
resound.com

Table of Contents

Other manuals for ReSound Multi Mic

Preview: Quick Guide
Quick Guide3 pages

Questions and Answers

  • J
    John FrancisAug 16, 2025
    What does it mean when the pairing sequence times out on ReSound Media Player?
    • M
      michaelkaiserAug 16, 2025
      If the pairing sequence times out and no pairing melody plays, the Multi Mic and the hearing instrument may not be within wireless range. Assure that the Multi Mic and hearing instruments are within wireless range and repeat pairing process. Also, the Multi Mic and the hearing instrument may not have been simultaneously in pairing mode. Repeat pairing process and assure that the battery doors on both hearing instruments are closed within 20 seconds after the pairing button has been pressed on the Multi Mic.
  • T
    tom89Aug 19, 2025
    Why is there no sound in my ReSound Media Player hearing instruments when streaming?
    • R
      ryan14Aug 19, 2025
      If you're not hearing sound in your hearing instruments while streaming, several factors could be at play. First, confirm that the ReSound Multi Mic and your hearing instruments are within wireless range. Also, check if the Multi Mic is powered on and streaming is activated; if not, power it on. Finally, ensure the Multi Mic hasn't run out of power; if it has, charge the battery.
  • J
    Jerry BarreraAug 22, 2025
    What to do if my ReSound Multi Mic does not turn ON?
    • H
      henryanneAug 22, 2025
      If your ReSound Multi Mic isn't turning on, make sure you're pressing the power button for at least 1.5 seconds until the status LED lights up green for 3 seconds. Also, check if the Multi Mic has run out of power and charge the battery if necessary.
  • J
    Jesse JosephAug 25, 2025
    Why is the sound level from my ReSound Media Player Multi Mic very low?
    • R
      richardgarciaAug 26, 2025
      If the sound level from your Multi Mic is too low, consider these points: * Make sure the Multi Mic is correctly positioned. Clip it to the speaker's clothing or use the lanyard, placing it 10-40 cm (4-16 inches) from their mouth. * Increase the volume using the “+” buttons on the Multi Mic. * If using line-in or FM input, the audio may be too low. Adjust the volume using the “+” and “-“ buttons on the Multi Mic, or adjust the volume on the external audio device, until the best sound level and quality is obtained.
  • L
    Leslie WilliamsAug 27, 2025
    What to do if my ReSound Multi Mic does not turn OFF?
    • C
      carl80Aug 27, 2025
      If your ReSound Multi Mic isn't turning off, ensure you press the power button for at least 1.5 seconds until the status LED lights green for 3 seconds.
  • W
    William GillespieAug 31, 2025
    Why is there no sound in my ReSound Media Player hearing instruments when streaming from line-in?
    • J
      Jason JenningsAug 31, 2025
      If you're not getting any sound in your hearing instruments while streaming, and an audio device is connected to the line-in, verify that the connected device is powered on and not muted. Also, check that the Multi Mic is not muted; if it is, unmute it.
  • W
    Wendy WintersSep 3, 2025
    What to do if the sound is too high or distorted when using the line-in on my ReSound Media Player?
    • M
      Margaret OrtizSep 3, 2025
      If the sound is too high or distorted when using the line-in, the audio level of the connected device may be too high. Adjust the volume using the “+” and “-“ buttons on the Multi Mic, or adjust the volume on the external audio device, until the best sound level and quality is obtained.
  • M
    mbradfordSep 6, 2025
    Why is the push button on my ReSound Media Player hearing instrument not working?
    • J
      John RobbinsSep 6, 2025
      If the push button on the hearing instrument isn't working, the Multi Mic and hearing instruments might not be paired. Try going through the pairing process again.
  • C
    christopherallenSep 8, 2025
    Why do my ReSound Media Player hearing instruments drop out of the streaming program?
    • T
      Tara DonovanSep 9, 2025
      If one or both hearing instruments drop out of the streaming program, the battery in one or both hearing instrument are so depleted that they no longer supports audio streaming. Replace the battery in the hearing instrument with a fresh one, and activate streaming again.
  • A
    Ashley BonillaSep 12, 2025
    Why can't I switch into line-in or FM mode on my ReSound Media Player?
    • A
      Ashley RobertsonSep 12, 2025
      If you cannot switch into the line-in or FM mode, make sure that the mini-jack or FM plug is firmly inserted into the Multi Mic. FM and line-in are only available when a plug has been inserted.

Summary

Device Components

Power Button

Controls the ON/OFF state of the Multi Mic.

Microphone Inlets

Ports for capturing audio input.

Status Light Indicator (LED)

Provides visual feedback on device status.

Line-in Port

Port for connecting external audio sources.

FM Connector

Connector for external FM receivers.

Volume Control Buttons

Buttons to adjust audio volume.

Mute Button

Button to mute/unmute audio output.

USB Charging Port

Port for charging the device.

Mute Light Indicator

Indicates mute status.

Mode;Battery Indicators

Indicates operational mode and battery level.

Mode Button

Button to cycle through operational modes.

Pairing Button

Button used for pairing with hearing instruments.

Mounting Clip

Accessory for attaching the device to clothing.

Getting Started

Charging the Battery

Instructions on how to charge the Multi Mic's rechargeable battery before first use.

Charging Safety

Important notes regarding charging safety, including placement and charger usage.

Power ON;OFF and Pairing

Turning the Multi Mic ON;OFF

Procedure to power on and off the Multi Mic using the power button.

Low Battery Indication

How the status LED indicates a low battery level.

Pairing in Channel 1

Step-by-step guide to pair the Multi Mic with hearing instruments in channel 1.

Advanced Pairing and Streaming

Pairing in Channels 2 and 3

Procedure to pair the Multi Mic in channels 2 and 3.

Starting Streaming

Methods to start audio streaming to hearing instruments.

Starting from Other Devices

How to start streaming from additional paired devices.

Stopping Streaming

How to Stop Streaming

Methods to stop audio streaming from the Multi Mic.

Microphone Directionality

Wearing the Multi Mic

How to wear the Multi Mic for optimal sound pickup.

Using as Table Microphone

How to place the Multi Mic on a table for group listening.

Status Light Indicators (LED)

LED Overview Table

Table detailing LED patterns for various device states like power and charging.

Modes of Operation

Built-in Microphones

How the Multi Mic uses its internal microphones for different listening scenarios.

Telecoil Mode

Receiving audio from teleloop systems.

Line-in Mode

Connecting to external analogue audio sources.

FM Mode

Receiving audio via an external FM receiver.

Using the Mode Button

Viewing Current Mode

How to check the current operational mode of the Multi Mic.

Changing Operational Mode

Procedure to switch between different input modes.

Checking Battery Status

How to view the remaining battery capacity using the mode LEDs.

Volume Control and Mute

Adjusting Volume

How to adjust the streamed audio volume using the device buttons.

Muting the Audio Signal

Procedure to mute and unmute the audio output from the Multi Mic.

Special Features

Drop Detection

Automatic muting feature activated by device drops.

Volume Control Lock

How to lock the volume settings to prevent accidental changes.

Test Mode

Entering Test Mode

Steps to activate the test mode for specific measurements.

Important Information

Maintenance and Care

Guidelines for cleaning and maintaining the Multi Mic.

General Warnings

Safety Warnings

Crucial warnings regarding child safety and environmental hazards.

General Precautions

Usage Precautions

Precautions for using the device in specific locations and with other equipment.

Built-in Battery Care

Battery Lifespan and Charging

Information on battery performance and longevity.

Battery Safety and Warnings

Critical warnings about battery handling, replacement, and disposal.

Charger Care

Charger Usage Guidelines

Instructions for proper use and care of the charging unit.

Charger Safety Warnings

Warnings related to charger use, power supply, and environmental conditions.

Technical Specifications

Operating Range and Power

Details on wireless range, power supply, and operating frequencies.

Temperature and Storage

Specifications for operating, charging, and storage temperatures.

Warranty Information

Warranty Coverage

Information on components and defects covered by the limited warranty.

Warranty Exclusions

Exclusions from the limited warranty and potential warranty voiding conditions.

Troubleshooting Guide

Power and Mode Issues

Troubleshooting steps for powering the Multi Mic on/off and mode switching.

Volume Control Lock Issues

Troubleshooting for inability to change volume due to locking.

No Sound During Streaming

Steps to resolve issues with no audio output during streaming.

Troubleshooting Continued

External Audio and Mute Issues

Troubleshooting sound issues with external sources and mute function.

Pairing Failures

Steps to take when pairing sequences time out or fail.

Further Troubleshooting

Hearing Instrument Dropouts

Troubleshooting when hearing instruments disconnect from the stream.

Sound Quality Issues

Resolving high volume, distorted, or low sound from audio sources.

ReSound Multi Mic Specifications

General IconGeneral
BrandReSound
ModelMulti Mic
CategoryMedia Player
LanguageEnglish

Related product manuals