Name: ReSound OMNIA
Brand: ReSound
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Using the push button

Changing programs

• Push the button briefly to switch from one program to the next.

You will hear one or more beeps. The number of beeps indicates which

program you have selected.

NOTE: If you have two hearing aids with synchronisation enabled, a

change of program on one hearing aid automatically applies to the

second hearing aid as well. The same number of beeps will then sound

in the second hearing aid.

Turning your hearing aids OFF and ON

See "Using your hearing aids", page 14.

When you turn the hearing aids off and on again, they always start up in program 1 and your pre-set volume level.

Customising the button actions

If you want to be able to adjust the volume on the hearing aids, the push button on one hearing aid can be set to

reduce the volume, and the button on the other hearing aid can be set to increase the volume. Any increase or

decrease made on one hearing aid will also apply to the other to ensure the volume is the same in both hearing

aids.

Your hearing care professional can change the default settings and fill in the table below to record the new

settings:

18 Using your hearing aids

Questions and Answers:

Need help?

Do you have a question about the ReSound OMNIA and is the answer not in the manual?

ReSound OMNIA Specifications

General