Revision 2.6 Page 7 of 53
Intuitive Mercury 6-5M Controller with TDB
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Intuitive Mercury Network Expansion Options
Intuitive Mercury TDB with Daughter Board Option
The Intuitive Mercury TDB controller can be purchased with optional daughter boards to expand on the controller I/O. The controller can be fitted
with a single daughter board, the types of daughter boards which are currently available and their part numbers are shown below.
Please note the daughter boards are a factory fit option only and must be ordered with the controller.
*Each daughter board comes with a colour coded connector as a visual indication.
3 x Temperature Probe Input Expansion board
1 x 0-5V/0-10Vdc Input & 1 x 0-5V/0-10Vdc Output board
2 x 0-5V/0-10Vdc Input board
2 x 0-5V/0-10Vdc Output board
1 x 4-20mA Input & 1 x Probe Input Expansion board
1 x 0-5/0-10Vdc Input & 1 x Probe Input Expansion board
1 x 4-20mA Input & 1 x 4-20mA Output board
3 x Input High Speed Pulse Counter board
WiFi Network Card (PR0769-INT)
Daughter card location (Optional)
The Intuitive Mercury is supplied with an RS232
Network Card fitted as standard. Some example
optional network cards are shown below
RS232 Network Card (Default)
WiFi Network Card (PR0769-EXT)
To Next Page
Loading...
Need help?
General
