Need help?Do you have a question about the Respironics REMstar M Series and is the answer not in the manual?
General| Pressure Range | 4-20 cm H2O |
|---|---|
| Altitude Adjustment | Automatic |
| Power Supply | 100-240V AC, 50/60 Hz |
| Heated Humidifier | Optional |
| Compliance Data | Yes |
| Device Type | CPAP |
| Ramp Time | 0 to 45 minutes |
| Weight | 2.2 lbs |
| Data Storage | Compliance data |
Defines the purpose of the REMstar M Series system and outlines crucial safety information, including warnings and contraindications.
Details the procedures for powering the REMstar M Series device using either AC or DC power sources.
Describes how to view and modify various device settings, including patient data and setup parameters.
Describes high-priority alerts displayed by the device and the required operator response.
Offers solutions for common problems encountered with the REMstar M Series device, including power and operational issues.
Details how to clean the reusable foam filter and replace the disposable ultra-fine filter.
To Next Page
