Retrotec DM32 User Manual

Page 5 of 91
© Retrotec 2017
3.3.9. Tap [Channel B] or [Settings] to change Result or units to be displayed .............................. 26
3.3.10. Tap [@ Pressure] to estimate Result at a different pressure ................................................ 27
4. Change [Settings] for gauge operating parameters ........................................ 32
4.1 Capture [Baseline] Pressure ........................................................................................................... 32
4.2 Set [Area] if using a Result per Area ............................................................................................... 33
4.3 Set [Volume] if using ACH ............................................................................................................... 34
4.4 Use metric units for dimensions ..................................................................................................... 35
4.5 Set the [Default @ Pressure] .......................................................................................................... 36
4.6 Set [Time averaging] period ........................................................................................................... 38
4.7 Change Result and units to be displayed........................................................................................ 39
4.8 Set up “Network” if using Ethernet connection ............................................................................. 41
4.9 View and update the [Firmware] version, check serial number .................................................... 42
4.10 Re-calibrate the touchscreen ......................................................................................................... 42
4.11 Reset button ................................................................................................................................... 43
5. Remotely run tests and save results with Retrotec software ......................... 44
5.1 Connecting gauges to a computer .................................................................................................. 44
5.2 Connect single gauge to a computer with Ethernet cable ............................................................. 44
5.3 Connect multiple gauges to a computer via “Wired” network ...................................................... 46
5.4 Connect computer or phone to the DM32 “WiFi” Hotspot ........................................................... 48
5.5 Make the DM32 join an existing “WiFi” network ........................................................................... 50
5.5.1. Set secure wireless credentials using DM32 Configurator software ..................................... 51
5.5.2. On DM32, verify wireless credentials after updating ............................................................ 51
6. Update gauge with new features ................................................................... 53
6.1 Connect the gauge to a computer via USB ........................................................................ 53
7. Verify your gauge accuracy between factory calibrations .............................. 55
8. What to do if you have trouble with the gauge ............................................. 58
8.1 Re-calibrate touchscreen if keys don’t respond well to taps ......................................................... 58
8.2 Gauge may get stuck running “Re-calibrate touchscreen” if the battery gets into a low state ..... 59
8.3 Reset if you need to clear the gauge to base settings .................................................................... 59
8.4 Flashing screen may appear as gauge recovers from deep discharge ........................................... 59
8.5 Pressing power button may not turn gauge On if battery is fully discharged................................ 59
8.6 Gauge will not reset (run splash screen) while gauge is plugged into power ................................ 59
8.7 Flashing yellow LED on front means gauge had an internal malfunction ...................................... 59

Retrotec DM32 Specifications

General

Brand	Retrotec
Model	DM32
Category	Measuring Instruments
Language	English