Need help?Do you have a question about the Retrotec DM32X and is the answer not in the manual?
General| Brand | Retrotec |
|---|---|
| Model | DM32X |
| Category | Measuring Instruments |
| Language | English |
Connecting the gauge to fans and computers, and charging the battery.
Operating the gauge power, using the home screen, and understanding status icons.
Explains how to use the keys on the home screen for gauge operation.
Explains how the gauge compensates for sensor drift.
Connecting the gauge to fans and selecting test parameters like Range and Device.
Setting fan speed, target pressure, and entering test dimensions.
Holding readings, changing display, and estimating results at different pressures.
Configuring baseline pressure, enclosure area/volume, and measurement units.
Managing Ethernet connection, firmware updates, and resetting the gauge.
Connecting gauges to a computer via Ethernet, USB, or wireless (WiFi, Bluetooth).
Using rCloud for tests, updating firmware, and accessing QuickGuides.
Steps to check tubes for blockages and verify gauge calibration.
Troubleshooting power, battery, Range/Device mismatch, and tube problems.
Addressing pressure overshoot, wind effects, and time averaging for accurate readings.
Specifies the pressure ranges and accuracy for different DM32X models.
Explains pressure measurements, flow equations, and extrapolation methods.
Covers temperature corrections, range mismatch, and measuring exhaust flow.
Definitions of key terms used in the manual.
To Next Page
