MINI 3D Scanner Quick Start Guide
29 COPYRIGHT ©2022 REVOPOINT 3D ALL RIGHTS RESERVED
1. Download the Software-Revo Scan at APP Store；
2. Find the Wi-Fi provided by the MINI, which is MINI-REVO_XXXXXXXX.
Note: The default SSID is: MINI-REVO-XXXXXXXX
The default Password is: Revopoint3d
For example: If the Serial Number of one MINI 3D scanner is: A22100122A6F00A64. The Default SSID and
Password are: SSID: MINI-REVO-A2210012
Password: Revopoint3d
3.
Type in the password: Revopoint3d and Confirm it connected successfully
；
4.
Open “Revo Scan” and confirm Settings;
Before scanning, select proper Accuracy, Scan Mode, Texture and Model Format according to your scan demand.
To Next Page
Loading...
