8
4. Installation
Step 1:
Install the Dash Cam
Unhook the straps in the back of the front camera, then wrap
them around your rearview mirror.
Connect the straps to the hook on the back of the camera to
secure the camera to the rearview mirror.
Step 2:
Insert the Memory Card
The Rexing M1 accepts [Class 10/UHS-1 or higher] Micro SD
memory cards up to 256GB.
You will need to insert a memory card before you can begin
recording. Before inserting or removing a memory card,
rst ensure you’ve powered down the device.
Gently push the memory card in until you hear a click, and
allow the spring release to push the card out.
To Next Page
Loading...
