9
Step 4
Power on the Camera and Format the Memory Card
Place the camera on the mount and carefully route the power cable around the
windshield and tuck it in under the trim.
Power the camera by connecting the charger to the car cigarette lighter and the
camera.
To ensure the S3 records to your memory card properly and without error, we
strongly recommend you to format the card within the camera when you're using
the dash cam for the first time.
Note:
Always remember backup important data stored on the memory card before
formatting.
The camera will shut down after 3 seconds when it's disconnect from the power
source and it should begin recording automatically the next time it is powered on.
M OK
Plug the mini
USB connector
to the dash cam
Route the
power cable
Plug the charger
into the power
outlet or a
cigarette lighter
To Next Page
Loading...
