Rexing V1LG - Installation

Getting Started
Quick Start
20
© 2018 REXING A ll Rig hts Re s er v ed .
Installation
Video guide: video.rexingusa.com
1. Attaching the front camera to the window mount
Before the device can be used in a car, it is essential to first install a properly
attached window mount. Make sure that you place the recorder in a safe,
appropriate location where it will not obstruct the driver’s view.
Clean windshield before applying the mount, do not attach camera for at least
20 minutes.
2. Mounting the rear camera
Mount the rear camera as shown below, using rear camera extension cable,
connect rear camera to the main unit.
The switch on rear camera can switch between regular/mirrored image.