Step 2
Step 1
Installing the Electrostatic Stickers
6
Get Started
Electrostatic
sticker
1.1 Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol. Follow
this by wiping it dry using a clean, dry cloth to ensure a spotless surface.
1.2 Position the Sticker
Next, carefully peel off the protective film from the electrostatic sticker.
Attach the sticker to the windshield, ideally behind the rear-view mirror.
This position is recommended to avoid obstructing your view while
you're on the road.
Install the Front Camera
Attach the adhesive mount to the desired location on the windshield and
leave it alone for at least 20 minutes before mounting the dash cam onto
it. Make sure that the dash cam is placed in the middle of the windshield
(behind the rear view mirror), and in a safe, appropriate location where it
does not obstruct the driver’s view.
To Next Page
Loading...
