3.4 Parameters
3.4.1 Description of Attribute Symbols in Parameter Tables
Parameter
attribute
Description
Parameter setting can be modified when the frequency converter is in run mode
● Parameter setting cannot be modified when the frequency converter is in run mode
★ Parameter setting cannot be modified directly
Tab. 3-1: Parameter attributes and descriptions
● Code: means function / parameter code, written in bxx, Exx, Pxx
and Hxx.
● Value of function / parameter code: written in [bxx], [Exx], [Pxx]
and [Hxx].
● Default: values that correspond to the factory default upon initiali-
zation at 50 Hz.
● Attrib.: means attribute.
Bosch Rexroth AG
Parameter Settings
20/31
DOK-RCON01-FE*********-IN04-EN-P
To Next Page
Loading...
