Why does my Rextron INTEGRA KVM2 keyboard or mouse not work from time to time?
The keyboard or mouse may not work correctly from time to time if the Rextron switch is low on operating power. Ensure the power adapter is properly connected to resolve this issue.
Why do the keys not work in Manual Scan on my Rextron INTEGRA KVM2?
The keys may not work in Manual Scan if all PCs are off, or only one PC is turned on. Scan mode works for power-on servers only, so turn the servers on.
Why can't I enter special function keys of a Sun server on my Rextron INTEGRA KVM2?
Do not hold down the CTRL key while pressing the second combo key.
How to resolve a Rextron Switch cascaded unit that does not work?
If the cascaded unit does not work, the power-up sequence may be incorrect. Turn on the Master, then the Slave switches.
What causes keyboard errors on boot with a Rextron INTEGRA KVM2 Switch, and how can I fix it?
A keyboard error on boot may be caused by a loose keyboard connection. Ensure that all keyboard cables are securely seated.
Why is there nothing on the screen when using my Rextron INTEGRA KVM2 Switch?
If there's nothing on the screen, it could be due to an incorrect video signal. Make sure the C-36 connectors are well mated.
What to do if the VGA monitor works fine, but the keyboard and touch pad do not work on my Rextron Switch?
If the VGA monitor works but the keyboard and touch pad don't, the connection inside the KVM drawer may be loose due to vibration. Disconnect the KVM drawer from the KVM module box. Connect a keyboard, mouse, and monitor to the Local port on the KVM module box, and another server to any of the PC ports, then use the KVM module box as a stand-alone KVM switch to verify if the KVM drawer is bad.
What should I do if the hotkey command is not effective on my Rextron Switch?
If the hotkey command isn't working, it's likely due to an incorrect hotkey sequence. To select a server connected to the Master, use three keystrokes. To select a server connected to a Slave, use four keystrokes.
How to fix a fuzzy or unclear VGA image on my Rextron Switch?
If the VGA image is fuzzy or not very clear, the cause may be poor quality VGA cables. Use UL-2919 rated VGA cables for video connection, as these cables use coaxial wires for R/G/B signals.
What to do if nothing works on my Rextron Switch?
If nothing is working, it might be due to a bad connection at the C-36 connectors. Push the assembled drawer and the KVM module box firmly together, leaving only 8mm (5/16 inch) space in between, and secure them with two screws.
Details the one-console and two-console matrix Sun KVM switches and their high video quality.
Highlights features like managing multiple servers, cascade configuration, and hot-plugging.
Explains connecting a Sun KVM Switch with an Integra Console to multiple Sun servers using cables.
Describes connecting second level KVM switches to a Master unit for expanded server control.
Guides connecting a TFT LCD KVM drawer or monitor/keyboard/mouse to the KVM switch's console port.
Explains connecting Sun servers using mini-DIN8 and HDB15 VGA cables to the KVM module.
Steps for powering up a single Integra Sun KVM Switch system by connecting power and turning on servers.
Steps for powering up cascaded Integra Sun KVM Switches, connecting power to master and slaves.
Details hot-key sequences for server selection, auto-scan, and audio stick control.
Describes how the KVM console emulates a Sun keyboard and maps extra keys.
Instructions for mapping specific keys for Japanese keyboards using combo-key sequences.
Details connecting servers or slave KVM switches to the Master unit's PC ports.
Explains how to change device connections at PC ports while the system is running.
Lists technical specifications for Integra Sun KVM Switch models ISM108 and ISM2208.
Offers common problems, their causes, and solutions for system issues.
Solutions for common VGA output problems like fuzzy images or no video signal.
Solutions for keyboard errors, non-working input devices, or shifted keystrokes.
General| Device Type | KVM switch |
|---|---|
| Product Type | KVM switch |
| Model | INTEGRA KVM2 |
| Number of Computers Supported | 2 |
| Number of Local Users Supported | 1 |
| Audio Support | Yes |
| Number of Ports | 2 Port |
| Compatibility | Mac |
| Cable Length | 1.8m |
| Switching Method | Hotkey, Button |
To Next Page
