Hardware Installation and Reference Guide Preparing for Installation
9 techsupport@ireyee.com
2.2.5 Checking the Mounting Workbench
Regardless of whether the device is installed on a desktop or wall, the following conditions must be met:
The desktop or wall surface must be smooth and clean.
The Ethernet cables must be in good condition.
2.3 Tools
Phillips screwdriver, cables, fastening bolts, diagonal plier, and cable ties
Wire stripper, crimping plier, RJ45 crimping plier, and wire cutter
Multimeter and bit error rate tester (BERT)
Note
The RG-E6 router is not shipped with a tool kit. You need to prepare a tool kit by yourself.
To Next Page
Loading...