Hardware Installation and Reference Guide Installation
10 techsupport@ireyee.com
3 Installation
Caution
Before installing the device, make sure that you have carefully read the requirements described in Chapter 2.
3.1 Before You Begin
Carefully plan and arrange the installation location, networking mode, power supply, and cabling of the device
before installation. Confirm the following points before installation:
The installation location should meet the temperature and humidity requirements of the device.
The installation location should meet the power supply and current requirements of the device.
The selected power supply should meet the system power requirements of the device.
The installation location should meet the cabling requirements of the device.
The installation location should meet the site selection requirements of the device.
Before proceeding with the installation, ensure that all the specific requirements of the intended users are
met if this device is designed for special purpose.
3.2 Safety Precautions
To ensure normal operation and prolonged service life of the device, observe the following safety precautions:
Do not power on the device during installation.
Place the device in a well-ventilated environment.
Do not expose the device to high temperature.
Keep the device away from high-voltage power cables.
Install the device indoors.
Do not expose the device to a thunderstorm or strong electric field.
Keep the device clean and dust-free.
Cut off the power supply before cleaning the device.
Do not wipe the device with a damp cloth.
Do not wash the device with liquid.
Do not open the enclosure when the device is working.
Secure the device.
3.3 Installation Procedures
3.3.1 Installing the Router
Installing the router on a flat surface
The router can be placed on a horizontal surface, such as on a shelf or desktop.
Installing the router on a wall
To Next Page
Loading...