Step ve: Installing the upper seat post into the lower seat post (cont.)
Locate the lower seat post knob (ridged).
Facing the rear of the Cruiser, insert the lower seat post knob into the lower seat post
and turn clockwise until it is fully tightened.
9)
10)
Locate the seat.1)
Ensure steady footing and lift the seat.2)
Orient the seat so the seat-back is facing forward (towards the tiller), and that the
bottom of the seat is directly over the top of the upper seat post.
3)
Step six: Installing and adjusting the seat
Twist the support ring’s twist screw until it is fully tightened.8)
If you do not ensure proper insertion of the detent pin, you risk
potential injury and product damage.
Assembly (Cont.)
17
To Next Page
Loading...