Charging option #2: O-board chargingii
Choose this option if you cannot charge near the Cruiser, and must
remove the battery pack to charge it elsewhere.
•
First ensure that ALL charging safety warnings in this user manual
are read, comprehended, and followed.
•
Firmly grip the battery pack handle from the top with both hands.•
Ensure steady footing, then carefully lift the battery pack from the
battery terminal, and place it next to a functioning electric wall
outlet in a safe, dry, at indoor area.
•
Locate the charging port cover on top of the battery pack.•
Firmly grip the pull tab on the charging port cover and lift it until
the charging port is fully visible.
•
Plug the metal end of the charger into the charging port, and
ensure it is fully connected.
•
Plug the two-pronged end of the charging cable into an
appropriate & functional electric wall outlet.
•
Firmly grip the pull tab on the charging port cover and lift it until
the charging port is fully visible.
•
Plug the metal end of the charger into the charging port, and
ensure it is fully connected.
•
Plug the two-pronged end of the charging cable into an
appropriate & functional electric wall outlet.
•
Charging Instructions (cont.)
23
To Next Page
Loading...