RHOSS MICROSYSTEM TCCE 126 T Series User Manual

MICROSYSTEM
ISTRUZIONI PER L’USO
INSTRUCTIONS FOR USE
MODE D’EMPLOI
GEBRAUCHSANWEISUNG
INSTRUCCIONES DE USO
TCCE-THCE 114÷126 versione / version
Refrigeratori d’acqua e pompe di calore reversibili
Water chillers and heat pumps
Refroidisseurs d’eau et pompes à chaleur réversibles
Kaltwassersätze und Wärmepumpen
Enfriadoras de agua y bombas de calor reversibles
TCCE-THCE 114÷126 T – TCCE-THCE 114-117 H versione / version
Refrigeratori d’acqua e pompe di calore reversibili con gruppo di pompaggio ed
accumulo integrati
Water chillers and heat pumps with integrated pumping and storage
Refroidisseurs d'eau et pompes à chaleur réversibles avec groupe de pompage et
d'accumulation intégré
Kaltwassersätze und Umsteuerbahre Wärmepumpen mit integriertem
Pumpenaggregat und Pufferspeicher
Enfriadoras de agua y bombas de calor reversibles con grupo de bombeo y
acumulación integrados
H50804
Italiano English Français Deutsch Español

RHOSS MICROSYSTEM TCCE 126 T Series Specifications

General

Brand	RHOSS
Model	MICROSYSTEM TCCE 126 T Series
Category	Chiller
Language	English

Summary

1.5 Warnings Regarding Potentially Toxic Substances

1.5.1.1 Identification of the refrigerant fluid type used

Identifies the refrigerant fluid types used in the unit.

1.5.1.4 Main toxicological information on the type of refrigerant used

Details toxicological information for the refrigerant used.

1.5.1.5 First aid measures

Outlines first aid procedures for refrigerant exposure.

1.6 Information on Residual Risks and Irremovable Hazards

1.7 Description of Controls

1.7.3 Control Keypad Installed on Machine

Explains the control keypad and its functions.

1.8 Instructions for Use

1.8.1 Unit Power Supply

1.8.2 Isolation from the Electricity Network

1.8.3 Start-up

Steps for starting the unit.

1.8.4 Switching Off

1.8.7 Setting Summer and Winter Set-Points

1.9.2 Alarm Signals

II.4 Handling Instructions

II.5 Installation Instructions

II.5.1 Installation Site Requirements

Specifies requirements for the installation site.

II.5.2 Indoor Installation

Guidelines for indoor installation locations.

II.6 Water Connections

II.6.1.1 Connection to the system

II.6.1.2 Protecting the unit from frost

II.7 Electrical Connections

II.8 Start-up Instructions

II.8.1 Configuration

II.8.2 Unit Start-Up

Step-by-step instructions for unit start-up.

II.9 Nature and Frequency of Scheduled Inspections

II.10 Maintenance Instructions

II.10.1 Ordinary Maintenance

Covers refrigerant, water, and electrical circuits maintenance.

II.10.2 Special Maintenance