User Tools (System Settings)
56
4
Note
❒
The paper guide for the optional LCT is fixed for A4
K
, 8
1
/
2
"
×
11"
K
size pa-
per. Contact your service representative if you need to change the paper size.
❒ If the paper size set for the selector in paper tray is different to the paper
size for this setting, the paper size of the dial has priority.
❒ If you load paper of a size not indicated on the paper size selector in the
paper tray, set the dial to " ".
❒ Default:
• Tray 1: A4K, 8
1
/
2
" × 11"K
• Tray 2: A3L, 11" × 17"L
• Tray 3: A4L, 8
1
/
2
" × 11"L
• Tray 4: A4L, 8
1
/
2
" × 14"L
Reference
p.122 “Changing the Paper Size”
❖
❖❖
❖ Paper Type: Bypass tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
❖
❖❖
❖ The paper types you can set for the bypass tray are as follows:
• No Display, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted Paper, Label Paper, Bond Paper, Thick Paper, OHP, Thin Pa-
per, Cardstock
Note
❒ Default: No display
❖
❖❖
❖ Paper Type: Tray 1–4
Sets the display so you can see what type of paper is loaded in each paper
tray. The print function uses this information to automatically select the pa-
per tray.
❖
❖❖
❖ The paper types you can set for trays 1, 3 and 4 are as follows:
• No Display, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted Paper, Bond Paper, Cardstock
❖
❖❖
❖ The paper types you can set for tray 2 are as follows:
• No Display, Recycled Paper, Special Paper, Color Paper, Letterhead,
Preprinted Paper, Label Paper, Bond Paper, Thick Paper, OHP, Thin Pa-
per, Cardstock
Note
❒ Default:
• Paper Type: No Display
• Copying Method in Duplex: 2 Sided Copy
• Apply Auto Paper Select: Yes
RussianC3_ENgsg-F_FM.book Page 56 Monday, June 16, 2003 6:48 PM
To Next Page