PostScript 3 - Setting Up for Printing
26
1
❖
❖❖
❖ “Paper Source”
Specify a paper feed tray where the paper to be used is loaded.
Note
❒ Select “Paper Feed Tray” here.
❖
❖❖
❖ [Graphic]
❖
❖❖
❖ “TrueType Font”
TrueType Font can replace printer fonts by following the “Font Substitu-
tion Table” when “Substitute with Device Font” is selected.
❖
❖❖
❖ [Printer Features]
❖
❖❖
❖ Adjust Image Brightness
The brightness of the whole printed image can be adjusted to one of seven
levels.
Note
❒ The brightness of the color of characters does not change.
❖
❖❖
❖ “Printer-Side Operation”
Settings can be made using the printer driver on the computer and the ma-
chine's display panel. When “Printer-Side Operation” is set to “On”, the
following items can be set on the display panel.
• Sort
• Clear Modes
• Speed Select
• Auto-Print after Master Making
• Job Separator
• Skip Feed
• Eco. Mode
• Number of print sets
Note
❒ “Auto-Print after Master Making” is displayed on the machine's dis-
play panel as “Auto Cycle”.
❖
❖❖
❖ “Clear Modes”
When set to “On”, the machine settings return to their defaults before Mas-
ter Making.
❖
❖❖
❖ “Auto-Print after Master Making”
When set to “On”, printing starts automatically immediately after Master
Making .
To Next Page
Loading...
