Copying
102
2
Directional Size Magnification (inch)
The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you require.
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal sizes of the original and those of the copy,
as shown in the illustration.
Limitation
❒ If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins will appear on
copies.
Note
❒ You can enter sizes within the following ranges:
❒ The following ratios can be selected:
• Metric version: 25 – 400%
• Inch version: 25 – 400%
Metric version 1 – 999 mm (in 1 mm steps)
Inch version 0.1" – 99.9" (in 0.1" steps)
1
3
24
CP2M01EE
To Next Page
Loading...
