Using Connect Copy
237
4
-
--
-Auto Reset
The machine exits Connect Copy mode and automatically returns to the initial
condition a certain period of time after your job has finished. This function is
called “Auto Reset”.
Note
❒ When the master unit “Auto Reset Timer” of the User Tools delay elapses, the
master unit will be reset automatically.
❒ When the sub-unit “System Reset” of the User Tools (System Settings) delay
elapses, Interrupt mode will be cancelled on the sub-unit.
Reference
See “Auto Reset Timer” in ⇒ p.292 “General Features
1
/
3
”.
See “System Reset” in the System Settings manual.
-
--
-Auto Off
The machine turns itself off automatically a certain period of time after your job
has finished. This function is called “Auto Off”.
Note
❒ You can change the Auto Off time.
Reference
See “Auto Off Timer” in the System Settings manual.
To Next Page
Loading...
