Troubleshooting
270
5
x
xx
x Clearing Misfeeds
❖
❖❖
❖ With 50-Sheet Finisher
CAUTION:
Important
❒ When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ If paper misfeeds occur repeatedly, contact your service representative.
Note
❒ More than one misfed area may be indicated. In this case, check every appli-
cable area. See the following charts: A, B, C, D, E1 – E5, P1, P2, U, R (R1 – R6)
❒ You can find a sticker explaining how to remove misfed paper inside of the
front cover or inside of the finisher.
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
ZBQY110E
To Next Page
Loading...
