Scanning Originals
215
3
C
CC
C
Enter a file name.
Note
❒ If you do not wish to register a file name, go to step D.
❒ If you do not register a file name, it is stored automatically.
To set the file name
A Press the [Change File Name] key.
B Enter the new file name using the letter keys on the display panel.
Note
❒ You can enter up to 8 letters.
❒ To switch to the capital letter mode or small letter mode, press the [Upper
Case] or [Lower Case] key.
❒ To change the letter entered, press the [Back Space], [Clear], or
{
{{
{Clear/Stop}
}}
} key and enter new letters. To delete the entered letters in 1
letter steps, press the [BackSpace] key. To delete all the entered letters,
press the [Clear] or {
{{
{Clear/Stop}
}}
} key.
C Press the [OK] key.
D
DD
D
Enter your password.
Note
❒ If you do not wish to enter a password, go to step E.
To set the password
A Press the [Change Password] key.
B Enter the password using the number keys (4 digits).
To Next Page
Loading...
