Ricoh AFICIO 1055 - Page 259

If Your Machine Does Not Operate as You Want
251
5
Connect Copy
Machine Status Problem/Cause Action
You cannot use Connect
Copy.
You cannot use Connect
Copy. The other machine is in
use.
The sub-unit has a paper mis-
feed or needs a fresh supply of
toner or other replenishable
supply.
Press the [Cancel] key on the
master unit and follow the in-
structions given on the sub-
unit display.
Reference
See ⇒ p.268 “D Changing
the Toner Bottle”.
See ⇒ p.270 “x Clearing
Misfeeds”.
See ⇒ p.283 “e Removing
Jammed Staples”.
If the sub-unit display shows
that a cover is open, follow the
instructions given. For all oth-
er situations, follow the in-
structions on the display.
The User Tools menu is open
on the sub-unit.
Press the [Cancel] key on the
master unit. Then on the sub-
unit press the {
{{
{User
Tools/Counter}
}}
} key to close the
User Tools menu.
The sub-unit is busy copying
or printing with another func-
tion.
Press the [Cancel] key on the
master unit then stop the sub-
unit from copying/printing.
The sub-unit is in Interrupt
mode.
Press the [Cancel] key on the
master unit. Then press the
{
{{
{Interrupt}
}}
} key on the sub-unit
to exit Interrupt mode.
Reference
⇒ p.86 “Interrupt Copy”
The sub-unit has been
switched off automatically by
the Weekly Timer function
and is waiting for the Key Op-
erator Off Code to be entered.
Press the [Cancel] key on the
master unit. Then on the sub-
unit enter the code and press
the [#] key.
Reference
See “Key Operator Code
for Off Setting” in the Sys-
tem Settings manual.
The sub-unit is not in Copy
mode (i.e., in Document Serv-
er mode).
Press the [Cancel] key on the
master unit. Then press the
{
{{
{Copy/New Job}
}}
} key on the
sub-unit to switch over to
Copy mode.