Settings You Can Change with the User Tools
293
6
Original Mode Display You can choose whether the original modes are shown on the ini-
tial display.
Note
❒ Default: No
❒ If you choose “Yes”, the display is shown as below.
Original Mode Quality Level
You can adjust the quality level of copies for each of the original types (Text, Text·Photo, Photo,
Pale, Generation).
Text Adjust the sharpness of text.
Note
❒ Default: Normal
❒ [SP Mode Changed] is the value set during service setup.
❒ Choosing [Sharp] or [Soft] affects the outline sharpness of text.
Text·Photo When there are photo(s) and text on the original, determine
whether the photo or text takes priority.
Note
❒ Default: Normal
❒ [SP Mode Changed] is the value set during service setup.
❒ [Normal] achieves a good balance between text and photos.
Menu Description
To Next Page
Loading...
