Copying
42
2
1: Horizontal size
2: Vertical size
3: Extender
4: Paper guide
Important
❒
If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Note
❒
Do not stack paper over the lim-
it mark; otherwise a skew image
or paper misfeeds might occur.
❒
Set the direction of the copy pa-
per to
L
.
❒
Swing out the extender to sup-
port larger size copy paper
(larger than A4
L
, 8
1
/
2
"
×
11"
L
).
❒
Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
When copying onto OHP
transparencies
A Lightly insert the OHP trans-
parencies face up and adjust
the paper guide.
Important
❒
The side of OHP transparen-
cies that is copied is fixed. Be-
fore you set the OHP
transparencies in the bypass
tray, check the cutting posi-
tion of the OHP transparen-
cies.
D Push down the paper guide re-
lease lever.
is selected automatically.
To Next Page
Loading...
