Ricoh Aficio 220 - Page 57

Copying from the Bypass Tray
43
2
Note
❒
If you set A4, 8
1
/
2
"
×
11" or larg-
er copy paper, hold the edge of
the paper and push down the
paper guide release lever.
❒
If you do not push down the pa-
per guide release lever, a mis-
feed might occur.
When copying onto non-standard
size copy paper
Important
❒
You should specify the size of
copy paper to avoid paper mis-
feeds.
A Press the
{
#
}
key.
B Press the
[
Pap.Size
]
key.
C Select
[
Custom Size
]
key by
pressing the 1 key. Then press
the
[
OK
]
key.
D Enter the horizontal size of the
paper with the Number keys,
then press the
{
#
}
key.
Note
❒
To change the number en-
tered, press the
{
Clear/Stop
}
key and enter the new
number.
E Enter the vertical size of the pa-
per with the Number keys,
then press the
[
OK
]
key.
Note
❒
To change the number en-
tered, press the
{
Clear/Stop
}
key and enter the new
number.
❒
When you copy onto plain
paper, go to step G.
F Press the
[
Pap.Type
]
key when
copying onto thick paper.
G Select
[
Thick
]
by pressing the 1
key. Then press the
[
OK
]
key.
H Press the
[
Exit
]
key.
When copying onto non-detected
standard size paper
Important
❒
You should specify the size of
paper to avoid paper misfeeds.