Loading Paper
27
2
D Load the new paper stack print
side up, making sure the paper is
flush against the paper guides.
Adjust the paper guides to close
any gaps.
E Lift the front of the paper tray
(Tray 1), and slowly slide the pa-
per tray back, until it stops. Make
sure the tray is fully inserted to
prevent paper jams.
Reference
For details about usable types of
paper, see “Loading Paper”,
Maintenance Guide.
AET044S
AET045S
GaiaP1GB_Setup-F4_FM_forPaper.book Page 27 Friday, June 3, 2005 7:50 AM
To Next Page
Loading...
