Selecting the Display Language
29
2
Selecting the Display Language
Select a language using the procedure
described here.
The message for the selected lan-
guage will appear on the display. If
you want to use the display in Eng-
lish, the following procedures are un-
necessary.
Note
❒ The default setting is English.
A Press the {Menu} key.
The “Menu” appears on the dis-
play.
B Press the {U} or {T} key to dis-
play “Language”.
C Press the {# Enter} key.
The following message appears on
the display:
D Press the {U} or {T} key until the
language you want to select ap-
pears.
E Press the {# Enter} key. Wait for
two seconds.
“Menu” appears on the display.
F Press the {Online} key.
“Ready” message appears on the
display.
Menu:
Language
AET005S
AET006S
Language:
*English
Ready
AET007S
GaiaP1GB_Setup-F4_FM_forPaper.book Page 29 Friday, June 3, 2005 7:50 AM
To Next Page
Loading...
