EasyManua.ls Logo

Ricoh Aficio CL4000DN - Page 70

Ricoh Aficio CL4000DN
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration
66
5
E Press the {U} or {T} key to select
Active Protocol, and then press
the {# Enter} key.
The following example explains
activating TCP/IP.
The “Active/Not Active” selection
screen appears.
F Press the {U} or {T} key to select
“Active” or “Not Active”, and
then press the {# Enter} key.
After the settings are made, about
two seconds later, the screen re-
turns to the active protocol menu.
G Set other protocols you need to set
in the same way.
H Press the {Escape} key, the screen
returns to the network setup
menu.
Note
The default is “Active”.
Leave unused protocols “Not
Active”.
Enable TCP/IP to use the Pure
IP environment of NetWare
5/5.1, NetWare 6/6.5.
I If you use TCP/IP, assign the IP
address to the printer. Press the
{U} or {T} key to display “IP Ad-
dress”, and then press the {# En-
ter} key.
The current IP address appears on
the display.
To get the IP address for the print-
er, contact your network adminis-
trator.
J Press the {U} or {T} key to enter
the left most entry field of the IP
address, and then press the {# En-
ter} key.
Press the {# Enter} key, the screen
changes, and the next field can
then be entered.
Note
Do not set “011.022.033.044” as
the IP address.
The value moves by 10 if the
{U} or {T} key is kept pressed.
When the {# Enter} key is
pressed, the cursor moves to the
next field.
To display the previous field,
press the {Escape} key.
Press the {Escape} key when no
value is entered and the screen
will return to the network setup
menu, without the IP address
changing.
K Make the other settings in the
same way, and then press the {#
Enter} key.
After the settings are made, about
two seconds later, the screen re-
turns to the network setup menu.
L If you use TCP/IP, assign “Subnet
Mask” and “Gateway Address
following the same procedure for
entering the IP address.
M When you use this machine in
DHCP environment, set DHCP to
“On”.
Active Protocol:
TCP/IP
TCP/IP:
*Active
IP Address:
192.022.033.044
IP Address:
192.168.000.010
GaiaP1GB_Setup-F4_FM_forPaper.book Page 66 Friday, June 3, 2005 7:50 AM

Related product manuals