Configuration
74
5
D Set “SCSI print” and “Bidi-SCSI
print” if necessary.
Note
❒ The default setting is “Active”.
E Press the {U} or {T} key to dis-
play “SCSI print”, and the press
the {# Enter} key.
F Press the {U} or {T} key to select
either “Active” or “Not Active”,
and then press the {# Enter} key.
After the settings are made, about
two seconds later, the screen re-
turns to the IEEE 1394 setting
menu.
G Set “Bidi-SCSI print” in the same
way.
H Press the {Online} key.
“Ready” appears on the display.
I Print a configuration page to con-
firm the settings made.
Reference
For details about printing the
configuration page, see p.30
“Test Printing”.
SCSI print:
*Active
GaiaP1GB_Setup-F4_FM_forPaper.book Page 74 Friday, June 3, 2005 7:50 AM
To Next Page
Loading...
