3
Remove the left guide as shown
in the illustration.
4
Set the left guide to the paper
size you want to use as shown in
the illustration.
5
Load paper in the tray.
S
Do not stack paper over the limit
mark.
6
While pressing the release levers
on the front and rear guides, slide
the front and rear guides to the
paper size you want to use.
7
Select the paper size by adjusting
the paper size selector on the
back side of the tray.
f-eu-7
1
1
2
1
1
2
CHANGING PAPER SIZE
111
To Next Page
Loading...
