Ricoh Aficio FT4027 - Adjusting Copy Image Density; Auto Image Density; Manual Image Density

5
Press the
Start
key.
S
To stop the copier during the multi-
copy run, press the Clear/Stop key.
S
Press the Start key to resume copy-
ing, or press the Clear/Stop key
again to clear the entered copy num-
ber.
Adjusting Copy Image Density
To match the type of originals, adjust the image density.
Auto image density
If the
Auto Image Density
indi-
cator is lit, the copier automat-
ically controls the image density.
If the indicator is not lit, press the
Auto Image Density
key.
Manual image density
If you have dark or light originals,
adjust the image density yourself.
Press the
Lighter
(left) key to
lower the image density. Press
the
Darker
(right) key to increase
the image density.
f-eu-5
7 8
0
9
R/#
C
Max
FREQUENTLY USED FUNCTIONS
41