Ricoh Aficio FT4027 - Storing Your Settings

STORING YOUR COPY SETTINGS IN MEMORY
(Program)
You can store up to five frequently used copy job settings in machine
memory, and recall for future use.
Storing Your Settings
1
Set the copy settings you want to
put into memory.
2
Press the
Program
key.
S
If you want to cancel storing, press
the Program key again.
3
While pressing the
Recall/Enter
key, press the
Number
key (
1
,
2
,
3
,
4
, or
5
) that you want to store
settings in.
S
PE will be displayed on the copy
counter if you select a protected pro-
gram number. In this case, repeat
steps 2 and 3 with another program
number.
S
If you want to protect your program,
follow the procedure in the next sec-
tion.
4
.
Release the
Recall/Enter
key.
f-eu-5
1 2
1
4
7
2
5
8
0
3
6
9
R/#
STORING YOUR COPY SETTINGS IN MEMORY (Program)
70